Loctek Premium Mount, 17"-30" Single Ergonomic Gas Spring Monitor Stand - Aluminum Silver - VESA 75x75 100x100 - Max Load 2-9KG - 5 Years Warranty

Brought a year ago for my 27" monitor to make room on my desk. That was worth the investment alone! The range of extension and of movement meant I also had plenty of options as to where I could mount the base on my desk.
It was fairly straight forward to mount and the VESA plate top two mounting holes are U shaped. By starting the top two thumbscrews into the back of the monitor you can easily slide the monitor up into place against the VESA mounting plate and insert the remaining thumbscrews. Doing this by myself was a breeze.

I have now (Sep '20) just upgraded to a 8+kg AOC 34" monitor and wasn't sure how that would go.
Some simple...view more Brought a year ago for my 27" monitor to make room on my desk. That was worth the investment alone! The range of extension and of movement meant I also had plenty of options as to where I could mount the base on my desk.
It was fairly straight forward to mount and the VESA plate top two mounting holes are U shaped. By starting the top two thumbscrews into the back of the monitor you can easily slide the monitor up into place against the VESA mounting plate and insert the remaining thumbscrews. Doing this by myself was a breeze.

I have now (Sep '20) just upgraded to a 8+kg AOC 34" monitor and wasn't sure how that would go.
Some simple adjustments to tighten the tension for the added weight of the new monitor and away I went.
There can be a little bounce in monitor (34") when the arm is extended further away from the base, but in my situation, it is side mounted and reasonably close to the base so not an issue for me but something to be aware of if you have a larger monitor.

In summary a good quality product, fairly easy to setup, and appears to exceed its own documented specs.
Recommend (and to prove it i'm just off to buy a second one for my son!)

By: TerryW97 06/09/20

Verified Owner

I attached a 32" to it no problem and adjusted the gas suspension to the weight of the monitor, from there I shifted the monitor to desired height and after a month the monitor is sitting precisely where I left it. There is a little bit of play if you touch the monitor but it does not throw it out of position. (I would guess that will be true of all arms and many stands too).

I squeezed the mount point between my desk and a wall, it needs about 1cm of clearance give or take. Cable management is tidy. The ball joint to adjust display orientation is a bit stiff, but tension on it can be adjusted. I attached a 32" to it no problem and adjusted the gas suspension to the weight of the monitor, from there I shifted the monitor to desired height and after a month the monitor is sitting precisely where I left it. There is a little bit of play if you touch the monitor but it does not throw it out of position. (I would guess that will be true of all arms and many stands too).

I squeezed the mount point between my desk and a wall, it needs about 1cm of clearance give or take. Cable management is tidy. The ball joint to adjust display orientation is a bit stiff, but tension on it can be adjusted.

Works great on my 8.5kg 34"monitor. Setting up was easy. Heaps of room to run mutiple cables and options to plug in mic,headphone and usb cables. Typical example of good value for money. Very happy with this purchase. Works great on my 8.5kg 34"monitor. Setting up was easy. Heaps of room to run mutiple cables and options to plug in mic,headphone and usb cables. Typical example of good value for money. Very happy with this purchase.

Hi,
Just installed the Loctek monitor arm for my Kamvas Pro 24" graphics tablet and it was very easy and fast to install. The arm itself comes already assembled and the arm is in the collapsed position and secured with a Velcro strap.
* Note: Do Not undo the strap until you have mounted it on the clamp and are ready to mount your monitor, and keep your face out of the way because it is spring loaded.
The only thing you need to do is fit and put the clamp on yr desk and tighten, this is very easy and fast to do. Then mount your screen with the screws supplied, either in the 75x75 or 100x100 holes in your monitor. It is very stable for my us...view more Hi,
Just installed the Loctek monitor arm for my Kamvas Pro 24" graphics tablet and it was very easy and fast to install. The arm itself comes already assembled and the arm is in the collapsed position and secured with a Velcro strap.
* Note: Do Not undo the strap until you have mounted it on the clamp and are ready to mount your monitor, and keep your face out of the way because it is spring loaded.
The only thing you need to do is fit and put the clamp on yr desk and tighten, this is very easy and fast to do. Then mount your screen with the screws supplied, either in the 75x75 or 100x100 holes in your monitor. It is very stable for my use.
Once installed then all you have to do is adjust the main screw so that your monitor stays at the height you want it to, I would put a small towel or pillow under your monitor just so you can rest it on your desk while you start your first adjustments. This adjustments are very easy to do, it's either clockwise or anti clockwise to move the arm up or down, my tablet is a 24" and weighs 6.5 kilos and the arm holds and moves this no problems at all. One thing I will note, is that I also put an extra lock nut under the main adjusting bolt because when you rotate and move the arm back and forward the bottom nut can come loose, so thats why I put the extra lock nut on and once in the position I liked, I then just tightened the lock nut and that fixed the problem.
This arm has a full range of movements up/down, left/right, tilt and a very long full extension of about 600mm, which is why I bought it, as I have the arm mounted on the side of my desk, as I have a 43" pc screen right in front, and the side mount still allows me to bring the tablet to the centre of my desk so i can work on it. I also attached a small foam tablet bumper along the bottom edge of my tablet just as extra protection in case I pull it down to fast.
All in all this is a great monitor arm, easy and fast to install, and I would recommend it for tablets and monitors it suits.
Cheers Kev

By: KevinBorg 19/12/21

Verified Owner

very impressed with this mount, easy to setup, has all the bits and pieces, even vesa screws. very sturdy materials and easy as to operate once monitor is on. Saves a ton of space. before I had a monitor riser which took up extra desk space and before that I had a tower mount which was fine but was a hassle to move up and down. now I can move this with ease up down (goes pretty low and can rise much higher than youd expect!) left and right, rotate it however I want aaand get back that desk space. it also has a mic and headphone jack and usb 3.0 on the top side which is welcome bonus (not for me though). keep in mind i have a 1500 length wise...view more very impressed with this mount, easy to setup, has all the bits and pieces, even vesa screws. very sturdy materials and easy as to operate once monitor is on. Saves a ton of space. before I had a monitor riser which took up extra desk space and before that I had a tower mount which was fine but was a hassle to move up and down. now I can move this with ease up down (goes pretty low and can rise much higher than youd expect!) left and right, rotate it however I want aaand get back that desk space. it also has a mic and headphone jack and usb 3.0 on the top side which is welcome bonus (not for me though). keep in mind i have a 1500 length wise desk with no obstructions side to side.

This is a good and reliable product. I just noticed there are a few additional features such as USB port or audio jack that are barely required by new monitors/laptops/headphones. I found those functions unnecessary. However, in terms of the main function, this is an excellent product. This is a good and reliable product. I just noticed there are a few additional features such as USB port or audio jack that are barely required by new monitors/laptops/headphones. I found those functions unnecessary. However, in terms of the main function, this is an excellent product.

I have been using this monitor arm on my Samsung CF791 for 9+ months. This monitor arm is well built and gives a professional clean look to your desk. I have been using this monitor arm on my Samsung CF791 for 9+ months. This monitor arm is well built and gives a professional clean look to your desk.

By: KapilR 06/09/20

Verified Owner

This Monitor riser is outstanding and easy to use. I have an LG 29" Ultrawide hooked upon it.
Used primary for gaming and love the freedom to move the monitor forward and back, up and down, and swivel.

I did have issues with installation as the bottom plastic cable management piece took time to fit in properly.
(Would be nice to see clearer instructions on how this fits in).
If using for single monitor, do keep in mind that the desk needs to be slightly away for the wall to prevent the lower arm from hitting the wall.
Also, you may find that having the base off-center as it is slightly hard to move when it is centered. This Monitor riser is outstanding and easy to use. I have an LG 29" Ultrawide hooked upon it.
Used primary for gaming and love the freedom to move the monitor forward and back, up and down, and swivel.

I did have issues with installation as the bottom plastic cable management piece took time to fit in properly.
(Would be nice to see clearer instructions on how this fits in).
If using for single monitor, do keep in mind that the desk needs to be slightly away for the wall to prevent the lower arm from hitting the wall.
Also, you may find that having the base off-center as it is slightly hard to move when it is centered.

Mounted a 34" widescreen, bracket is sturdy and it hasn't sagged. Mounted a 34" widescreen, bracket is sturdy and it hasn't sagged.

I bought this for my 34inch monitor works great for my needs I bought this for my 34inch monitor works great for my needs

I've had this for a few months now and am very happy with the purchase. It was easy to install and I've had no issues. I don't really move my monitor around despite having a good range to be able to do so with this arm. I'm very happy with this purchase. I've had this for a few months now and am very happy with the purchase. It was easy to install and I've had no issues. I don't really move my monitor around despite having a good range to be able to do so with this arm. I'm very happy with this purchase.

Handles. 27" Curved monitor (heavy) with no issues. Can be difficult to get a hang of but just involves getting the right tightness of the joints. Handles. 27" Curved monitor (heavy) with no issues. Can be difficult to get a hang of but just involves getting the right tightness of the joints.